Nonblocking pool is initialized что это значит

I forgot my password on the raspberry pi so I followed the instructions here:
http://lifehacker.com/reset-a-forgotten . 1631050216

It basically just tells you to add a line of code to the cmdline.txt file.

I did this and once I rebooted, my system wont boot and displays «random: nonblocking pool is initialized».

I took out the text and put the cmdline.txt file back to original, and I still have the same issue.

Can anyone help?

Re: random: nonblocking pool is initialized

cmdline.txt has to have ONE line only, if you split the line with a cr/lf sequence you’ll get a boot failure.

«random: nonblocking pool is initialized» isn’t an error message, it’s just the last thing the kernel does before it attempts to interpret the cmdline.txt.

Languages using left-hand whitespace for syntax are ridiculous

DMs sent on Twitter/LinkedIn will be answered next month.
Fake doctors — are all on my foes list.

The use of crystal balls and mind reading is prohibited.

Re: random: nonblocking pool is initialized

I was getting this problem too. I tried installing 7-zip on my Windows10 laptop. I had been using the included windows unzip tools. After unzipping the Rasbian image with 7-zip it worked.

I am using Wheezy and an original Rpi.

Re: random: nonblocking pool is initialized

cmdline.txt has to have ONE line only, if you split the line with a cr/lf sequence you’ll get a boot failure.

«random: nonblocking pool is initialized» isn’t an error message, it’s just the last thing the kernel does before it attempts to interpret the cmdline.txt.

Re: random: nonblocking pool is initialized

You really shouldn’t hijack an ancient thread. Too much has changed since 2015.

If the system has NOOBS it has a cmdline editor — hold or tap [SHIFT] during boot to activate the NOOBS rescue system.

If the system is plain Raspbian Jessie or Raspbian Stretch then you can simply insert it in a Windows system and edit F:\cmdline.txt with notepad++.

Languages using left-hand whitespace for syntax are ridiculous

DMs sent on Twitter/LinkedIn will be answered next month.
Fake doctors — are all on my foes list.

The use of crystal balls and mind reading is prohibited.

Источник

S9 подключается к пулу на 5 минут, а затем отключается от него

karzada

Пляшущий с бубном

areht

Юрист

buben4ik

Бывалый

Paluch

Бывалый

karzada

Пляшущий с бубном

да ему уже почти 2 года))

Вложения

karzada

Пляшущий с бубном

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty ([email protected]) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 — 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 — 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 — 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 — 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 — 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 — 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 — 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 — 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 — 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 — 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000309] ps7-ttc #0 at df804000, irq=43
[ 0.000621] Console: colour dummy device 80×30
[ 0.000653] Calibrating delay loop. 1325.46 BogoMIPS (lpj=6627328)
[ 0.040207] pid_max: default: 32768 minimum: 301
[ 0.040428] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040448] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042635] CPU: Testing write buffer coherency: ok
[ 0.042984] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043046] Setting up static identity map for 0x4c4af8 — 0x4c4b50
[ 0.043269] L310 cache controller enabled
[ 0.043288] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121035] CPU1: Booted secondary processor
[ 0.210228] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210361] Brought up 2 CPUs
[ 0.210380] SMP: Total of 2 processors activated.
[ 0.210388] CPU: All CPU(s) started in SVC mode.
[ 0.211084] devtmpfs: initialized
[ 0.213511] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214763] regulator-dummy: no parameters
[ 0.223790] NET: Registered protocol family 16
[ 0.226111] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228421] cpuidle: using governor ladder
[ 0.228434] cpuidle: using governor menu
[ 0.235933] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237450] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237464] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237576] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.260044] bio: create slab at 0
[ 0.262519] vgaarb: loaded
[ 0.263221] SCSI subsystem initialized
[ 0.264128] usbcore: registered new interface driver usbfs
[ 0.264300] usbcore: registered new interface driver hub
[ 0.264529] usbcore: registered new device driver usb
[ 0.265063] media: Linux media interface: v0.10
[ 0.265220] Linux video capture interface: v2.00
[ 0.265461] pps_core: LinuxPPS API ver. 1 registered
[ 0.265472] pps_core: Software ver. 5.3.6 — Copyright 2005-2007 Rodolfo Giometti [email protected] >
[ 0.265616] PTP clock support registered
[ 0.265973] EDAC MC: Ver: 3.0.0
[ 0.267017] Advanced Linux Sound Architecture Driver Initialized.
[ 0.269996] DMA-API: preallocated 4096 debug entries
[ 0.270012] DMA-API: debugging enabled by kernel config
[ 0.270103] Switched to clocksource arm_global_timer
[ 0.289854] NET: Registered protocol family 2
[ 0.290612] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.290672] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.290757] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.290807] TCP: reno registered
[ 0.290826] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.290860] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291117] NET: Registered protocol family 1
[ 0.291451] RPC: Registered named UNIX socket transport module.
[ 0.291463] RPC: Registered udp transport module.
[ 0.291471] RPC: Registered tcp transport module.
[ 0.291480] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291493] PCI: CLS 0 bytes, default 64
[ 0.291948] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.294014] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296239] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296440] msgmni has been set to 967
[ 0.297238] io scheduler noop registered
[ 0.297251] io scheduler deadline registered
[ 0.297290] io scheduler cfq registered (default)
[ 0.312210] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.312232] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.438129] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.006160] console [ttyPS0] enabled
[ 1.010484] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.018093] [drm] Initialized drm 1.1.0 20060810
[ 1.035198] brd: module loaded
[ 1.044597] loop: module loaded
[ 1.053945] e1000e: Intel(R) PRO/1000 Network Driver — 2.3.2-k
[ 1.059698] e1000e: Copyright(c) 1999 — 2013 Intel Corporation.
[ 1.068115] libphy: XEMACPS mii bus: probed
[ 1.072689] ————- phy_id = 0x3625e62
[ 1.077440] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.086056] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.092726] ehci-pci: EHCI PCI platform driver
[ 1.099939] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.106864] usbcore: registered new interface driver usb-storage
[ 1.113764] mousedev: PS/2 mouse device common for all mice
[ 1.119861] i2c /dev entries driver
[ 1.126841] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.132398] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.138283] Xilinx Zynq CpuIdle Driver started
[ 1.143188] sdhci: Secure Digital Host Controller Interface driver
[ 1.149284] sdhci: Copyright(c) Pierre Ossman
[ 1.153651] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.160504] mmc0: no vqmmc regulator found
[ 1.164521] mmc0: no vmmc regulator found
[ 1.200119] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.208805] usbcore: registered new interface driver usbhid
[ 1.214317] usbhid: USB HID core driver
[ 1.219048] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.225347] nand: Micron MT29F2G08ABAEAWP
[ 1.229308] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.235253] Bad block table found at page 131008, version 0x01
[ 1.241477] Bad block table found at page 130944, version 0x01
[ 1.247532] 3 ofpart partitions found on MTD device pl353-nand
[ 1.253319] Creating 3 MTD partitions on «pl353-nand»:
[ 1.258407] 0x000000000000-0x000002000000 : «BOOT.bin-env-dts-kernel»
[ 1.266474] 0x000002000000-0x00000b000000 : «angstram-rootfs»
[ 1.273837] 0x00000b000000-0x000010000000 : «upgrade-rootfs»
[ 1.282833] TCP: cubic registered
[ 1.286068] NET: Registered protocol family 17
[ 1.290790] Registering SWP/SWPB emulation handler
[ 1.296705] regulator-dummy: disabling
[ 1.301105] UBI: attaching mtd1 to ubi0
[ 1.829144] UBI: scanning is finished
[ 1.840765] UBI: attached mtd1 (name «angstram-rootfs», size 144 MiB) to ubi0
[ 1.847819] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.854609] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.861291] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.868129] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.874139] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.881250] UBI: max/mean erase counter: 353609/351432, WL threshold: 4096, image sequence number: 1984962504
[ 1.891148] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.900365] UBI: background thread «ubi_bgt0d» started, PID 1080
[ 1.900371] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.904419] ALSA device list:
[ 1.904423] No soundcards found.
[ 1.920890] UBIFS: background thread «ubifs_bgt0_0» started, PID 1082
[ 1.988279] UBIFS: mounted UBI device 0, volume 0, name «rootfs»
[ 1.994245] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.003340] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.013234] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.018255] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 56FDF5FA-8D29-4AA7-95D4-1C2E28C7C4E9, small LPT model
[ 2.029835] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.037273] devtmpfs: mounted
[ 2.040412] Freeing unused kernel memory: 204K (c06d2000 — c0705000)
[ 2.886035] random: dd urandom read with 0 bits of entropy available
[ 3.280115]
[ 3.280115] bcm54xx_config_init
[ 3.890149]
[ 3.890149] bcm54xx_config_init
[ 6.890967] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.897054] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 19.437529] In axi fpga driver!
[ 19.440622] request_mem_region OK!
[ 19.443991] AXI fpga dev virtual address is 0xdf9fc000
[ 19.449096] *base_vir_addr = 0x8c510
[ 19.464288] In fpga mem driver!
[ 19.467528] request_mem_region OK!
[ 19.471145] fpga mem virtual address is 0xe2000000
[ 20.239508]
[ 20.239508] bcm54xx_config_init
[ 20.869464]
[ 20.869464] bcm54xx_config_init
[ 23.870005] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 23.876022] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 1175.681587] random: nonblocking pool is initialized
Detect 512MB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=550 Chain[5] voltage_pic=6 value=940
Fix freq=550 Chain[6] voltage_pic=6 value=940
Fix freq=550 Chain[7] voltage_pic=6 value=940
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has no freq in PIC, set default freq=550M
Chain[J6] has no core num in PIC
Chain[J7] has no freq in PIC, set default freq=550M
Chain[J7] has no core num in PIC
Chain[J8] has no freq in PIC, set default freq=550M
Chain[J8] has no core num in PIC

Miner fix freq .
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550 Asic[18]:550 Asic[19]:550 Asic[20]:550 Asic[21]:550 Asic[22]:550 Asic[23]:550 Asic[24]:550
Asic[25]:550 Asic[26]:550 Asic[27]:550 Asic[28]:550 Asic[29]:550 Asic[30]:550 Asic[31]:550 Asic[32]:550
Asic[33]:550 Asic[34]:550 Asic[35]:550 Asic[36]:550 Asic[37]:550 Asic[38]:550 Asic[39]:550 Asic[40]:550
Asic[41]:550 Asic[42]:550 Asic[43]:550 Asic[44]:550 Asic[45]:550 Asic[46]:550 Asic[47]:550 Asic[48]:550
Asic[49]:550 Asic[50]:550 Asic[51]:550 Asic[52]:550 Asic[53]:550 Asic[54]:550 Asic[55]:550 Asic[56]:550
Asic[57]:550 Asic[58]:550 Asic[59]:550 Asic[60]:550 Asic[61]:550 Asic[62]:550
Chain:5 max freq=550
Chain:5 min freq=550

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550 Asic[18]:550 Asic[19]:550 Asic[20]:550 Asic[21]:550 Asic[22]:550 Asic[23]:550 Asic[24]:550
Asic[25]:550 Asic[26]:550 Asic[27]:550 Asic[28]:550 Asic[29]:550 Asic[30]:550 Asic[31]:550 Asic[32]:550
Asic[33]:550 Asic[34]:550 Asic[35]:550 Asic[36]:550 Asic[37]:550 Asic[38]:550 Asic[39]:550 Asic[40]:550
Asic[41]:550 Asic[42]:550 Asic[43]:550 Asic[44]:550 Asic[45]:550 Asic[46]:550 Asic[47]:550 Asic[48]:550
Asic[49]:550 Asic[50]:550 Asic[51]:550 Asic[52]:550 Asic[53]:550 Asic[54]:550 Asic[55]:550 Asic[56]:550
Asic[57]:550 Asic[58]:550 Asic[59]:550 Asic[60]:550 Asic[61]:550 Asic[62]:550
Chain:6 max freq=550
Chain:6 min freq=550

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550 Asic[18]:550 Asic[19]:550 Asic[20]:550 Asic[21]:550 Asic[22]:550 Asic[23]:550 Asic[24]:550
Asic[25]:550 Asic[26]:550 Asic[27]:550 Asic[28]:550 Asic[29]:550 Asic[30]:550 Asic[31]:550 Asic[32]:550
Asic[33]:550 Asic[34]:550 Asic[35]:550 Asic[36]:550 Asic[37]:550 Asic[38]:550 Asic[39]:550 Asic[40]:550
Asic[41]:550 Asic[42]:550 Asic[43]:550 Asic[44]:550 Asic[45]:550 Asic[46]:550 Asic[47]:550 Asic[48]:550
Asic[49]:550 Asic[50]:550 Asic[51]:550 Asic[52]:550 Asic[53]:550 Asic[54]:550 Asic[55]:550 Asic[56]:550
Asic[57]:550 Asic[58]:550 Asic[59]:550 Asic[60]:550 Asic[61]:550 Asic[62]:550
Chain:7 max freq=550
Chain:7 min freq=550

max freq = 550
set baud=2
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:52 remote:54 offset:30
Chain[J6] chip[244] get middle temp offset=30 typeID=55
Chain[J6] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J6] has no temp offset in PIC! will fix it
New offset Chain[5] chip[244] local:51 remote:54 offset:29
Chain[J6] chip[244] get middle temp offset=29 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:53 remote:56 offset:30
Chain[J7] chip[244] get middle temp offset=30 typeID=55
Chain[J7] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J7] has no temp offset in PIC! will fix it
New offset Chain[6] chip[244] local:53 remote:56 offset:30
Chain[J7] chip[244] get middle temp offset=30 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:47 remote:50 offset:29
Chain[J8] chip[244] get middle temp offset=29 typeID=55
Chain[J8] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J8] has no temp offset in PIC! will fix it
New offset Chain[7] chip[244] local:47 remote:50 offset:29
Chain[J8] chip[244] get middle temp offset=29 typeID=55
Chain[J6] set working voltage=940 [6]
Chain[J7] set working voltage=940 [6]
Chain[J8] set working voltage=940 [6]
setStartTimePoint total_tv_start_sys=69 total_tv_end_sys=70
restartNum = 2 , auto-reinit enabled.
Fatal Error: Fan lost!
Fatal Error: Fan lost!
Fatal Error: Fan lost!
Fatal Error: Fan lost!
Fatal Error: network connection lost!
Fatal Error: Fan lost!
Fatal Error: network connection lost!
Fatal Error: Fan lost!
Fatal Error: network connection lost!
Fatal Error: Fan lost!

do read_temp_func once.
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)

get RT hashrate from Chain[6]: (asic index start from 1-63)

get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[29]=133.714000
Asic[57]=128.177000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[29]=128.496000
Asic[57]=129.620000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[29]=114.454000
Asic[57]=118.799000
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=29
read failed, old value: Chain[5] Chip[62] local Temp=72
read failed on Chain[5] Chip[62] middle Temp old value:84
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=30
read failed, old value: Chain[6] Chip[62] local Temp=74
read failed on Chain[6] Chip[62] middle Temp old value:86
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=29
read failed, old value: Chain[7] Chip[62] local Temp=68
read failed on Chain[7] Chip[62] middle Temp old value:79
Done read temp on Chain[7]
set FAN speed according to: temp_highest=86 temp_top1[PWM_T]=86 temp_top1[TEMP_POS_LOCAL]=74 temp_change=0 fix_fan_steps=4
FAN PWM: 100
read_temp_func Done!
CRC error counter=0

Источник

Nonblocking pool is initialized что это значит

Обычно Ubuntu 14.04.2 занимает много времени на этапе «random: неблокирующий пул инициализируется» во время процесса загрузки?

3 ответа